AutoCAD Jobs

Anteproyecto, Proyecto, Metrado y Presupuesto para Remodelación y Ampliación de vivienda en Jesús María (Lima-Perú) Expediente de Licencia de Ampliación Modalidad A/B - Casa en Jesús María de 3 pisos (1er Piso pertenece a un tercero) - Casa de 70 años de antigüedad - 2do Piso presenta rajaduras en Techos y Muros Se requiere COTIZAR los sgtes puntos: 1. Presupuesto y Alcance de Reparación de rajaduras en Techos y Muros del 2do Piso (Incluye visita de Inspección/Evaluación Técnica de ambientes para elaboración y cálculo Presupuesto de Reparación y reforzamientos) 2. Anteproyecto/Proyecto para Remodelación de 2do Piso 3. Anteproyecto/Proyecto para Ampliación de ...

El proyecto consiste en: Creación de indicadores para puesto de Cadista en empresa metalúrgica. Los mismo deben ser para poder mejorar el rendimiento de la persona que ocupa el puesto y poder ver en qué hay que mejorar. Si o si que la persona hable español.

Necesito que me hagan un trabajo en autocad de un edificio de trata de plantas alzados y secciones con toda la información correspondiente

I'm looking for a custom AutoCAD template. The design needs to be usable in AutoCAD. I'm looking for a template that's able to be provided in .DWT format. I already have an A3 template that I need replicated into A1. If you feel up for this challenge, I'd love to hear from you.

we need someone that will work through a lot of family types to created them based on our datasheets, the 3dmodels will need to be done in REVIT as a native file. i will provide the Brief and a sample of the REVIT file we are expecting. This will be for the Emergency and EXIT lights. there will be different symbols on the front page that will need to be selectable

Hello Freelancers! I would like to create a pilot – a test – to see if it’s possible to convert a 3D drawing for metal-works into a 3D drawing tailored for 3D printing. There are some specific properties and limitations is 3D printing which needs to be considered compared to manufacturing in metal. For the pilot, I have chosen a part called “BALJA”. It is pretty large and in metal, it’s made up of several pieces which is put together. For 3D printing, all parts are not needed to be printed separately, but everything as a unit. To make a be successful drawing for 3D printing, the attached PDF () must be fully understood, the composition and how it will look assembled in metal. To your support, there are also files for SOLIDWORKS which is related. Once t...

I have a simple interior design project. That requires a skilled interior designer to design the interior of a newly renovated building, guidelines and measurements will be given to you regarding the design

I had hired an architect that we gave our home design to put in CAD with dimension and create elevations. Unfortunately he is not understanding our final changes and hasn’t lined up the upstairs with the main floor and has created an awful roof line. We need someone to do our final touches to an existing design.

I'm looking for a skilled freelancer to help draw (not design) a packing line for my production needs. I will provide all the design inputs. I expect the freelancer to make a perfect 2D layout. I shall also provide a template of the final output I am expecting. I hope to close the project in the next 2 (48 hours) days.

Looking to add a small apartment above my existing garage and need some blueprints done for that space. Thanks!

I am looking for a professional to perform construction take-offs for my project. Specifically, I need a take-off of the quantities of materials needed. Structural analysis is not necessary at this time, and I require a high level of accuracy. As such, the ideal candidate would be experienced in performing these types of take-offs and have an eye for detail. If you have experience in this area and excellent skills with accuracy, I would be very interested in learning more about your services.

Construct a roof to cover deck, attached to existing house. I would also want to renovate the bathroom and build a garage next to the house. Preferably need someone who can help in securing the permits if needed. Budget is negotiable for now but willing to pay $30/hr

I'm looking for an experienced freelancer to help create patent drawings for a project I'm working on. The drawings will be of a mechanical nature and will be done using computer aided designs. Please note that I have a specific deadline for this project, so any applicants need to be able to work quickly and accurately. If you believe that you have the experience and expertise needed for this project, please apply.

Hi, I'm looking for someone to stamp and provide calcs (2-sets) for stucture, foundation and roof on a small project. Im acting as owner/designer/drafter. Just need to stamp required Revisions, if any, to receive Kern County Building Permit. Thanks.

I have two adjoining rooms . I want to make them a single room with the connecting walking closet.

I need a HVAC Engineering Calculation done on a residential unit.

I'm looking for someone to help me with the architectural redesign of my project. I know exactly what style I have in mind - contemporary. I also have specific designs and blueprints I'd like to use, meaning I'm looking for someone to help make this a reality. Finally, I need 3D renderings of the project, which will be a part of the overall design. Ideally I would like someone who has experience creating contemporary designs as well as someone with the expertise and knowledge to create 3D renderings. If you think you have the skillset for this job, please get in touch. Thanks for your time.

I need a structural drawings for a building and work on it on revit

I already have dxf but the lines are spline and not polylines. I need the dxf as polyline so the characters look smooth. All the lines should be simple lines.

I am looking for a freelancer to help me with a project to refurbish the exterior of a medium-sized building. The primary material which will be used is paint, but I would also be open to the use of wood, depending on the best course of action. I need help achieving a medium level of surface finish. I'm looking for someone with experience in this sort of project and the necessary skillset to bring the building back to life. If this is something you might be interested in, please let me know. Please do not include any modifications to the building such as windows . Electrical additions, plants and other external finishes are welcome but the main concept is what color will we repaint the building

Plan of 2bhk floor with attached bathroom and a with parking

I would like to extend the kitchen into the backyard, and relocate the stand alone shower room in the backyard to attached to the house.

Hi, looking for an expert Vastu floor planner for a house.

帮我设计一款婴儿尿布桶（57片左右的容量）大概9-12L 无感应结构，机械开启结构，可以参考anglecare，自主设计，全塑料

I am looking to turn an existing project into a 3D model for personal use. I have existing drawings or designs which will provide the basis of the 3D model. I have specified a deadline that must be met. I'm looking for someone to provide excellent services and generate a finished product that meets my needs.

Looking for Interior designer for an apartment

I bought a commercial unit in a building. the work inside was done without a permit ( including mezzinine) I talked to the building dept at the city and they need drawings (stamped) to get the permit. the mezzinine is built quite well but i need plans drawn up so i can submit to the city. I would think a site inspection will need to be done , by you and then write it up so I would prefer someone in the Barrie area. I would like to build office under the mezzinine and use the upstairs for storage if possible. basic commercial building . concrete block walls steel decking roof . not moving any plumbing.

Needed: Structural plans for a 30x60 foot pole barn 4:12 pitch, 60# snow load roof Pier concrete foundation elevated flooring deck, 4 feet Needed are all plans, structural, foundation, electrical, plumbing Plans MUST be stamped by a licensed California Engineer

Please have a look at the attached description. When finished, make a dummy entry. I'll conact you via private chat and you can share the files with me for checking. Thank you!

I need a structural engineer to design foundation plans with loads per State of Ohio, US code for 2 residential homes I have designed. Home plans attached

I purchased a prefabricated metal building to use as a warehouse and will be located in Raleigh, NC. I need a few things: 1. A full site construction package 2. I need the building drawings to be verified and stamped with the NC seal for my construction permits including the foundation plan (I have these drawings in CAD and PDF format) 3. I need to create the mechanical, electrical, and plumbing drawings I can provide the CAD files once agree on project/pricing

I need Structural engineer expert in STAAD pro to do calculations report of steel structure. I will share the details to the suitable engineer.

Urban development project. Drawings plans, sections, architecture details. Sketchup modelling if needed. Work to be done on immediate basis.

I want someone who can do modeling & Rendering for Apartment Interior Design. I will provide the drawings in Cad format. I need 5 views. I will pay 3000 for each.

I require a 3D cad drawing of a garden building.

I would like to add 2 skylights to the attic

Structural drafting of GROUND FLOOR and first floor beam and slab details in longitudinal section.i need section of beam both longitudinal section.

Hello, I'm seeking a CAD designer who is well-versed in the software autocad and fusion 360. Requirement- To create CAD designs for a garment which would be 3D printed. Accurate designs are to be expected in a particular time frame. Please let me know if you have experience in the following area.

Gear box design with 300:1 ratio with very low fractions

Update CAD files for a 16X32 traditional and 20X40 modern

NEED A FURNITURE DRAFTSMAN WHO CAN DO CUSTOMIZED FURNITURE DEIGN WITH CLEAR VISION AND ACCCURACY. FOLLOW THE REFERENCE IMAGES AS WELL AS THE SIZES SHOULD BE SAME AS THE GIVEN REFERENCE IMAGE.

We are looking to create a wooden (black) room divider that does not require any drilling to mount, which will be achieved by "clamping" it in place between the floor and ceiling with adjustable feet (Similar to how the shelf is mounted in picture 2). Each divider is 2.5 m tall and 1 m wide. It is meant to consist of 3 vertical bars and 5 horizontal, with two pairs of feet at the top and bottom of the frame. The spacing of the vertical bars is 50 cm, and the horizontal bars are 83.3 cm (roughly as in picture 1) The thickness of the bars are 33.33 mm. The measurements aren't set in stone and can be adjusted as appropriate. The adjustable feet should look like in picture 2.1, and be positioned like in picture 2. Each bar will be cut in a way that makes it easy for customer...

We are a builder looking for an experienced draftsman who is familiar with building principles and heights in Australia. The draftsman will be responsible for drawing up plans and elevations based on existing designs and client requirements, as well as producing a full set of drawings for construction. Requirements: Extensive experience as a draftsman, with a portfolio of previous work to showcase Familiarity with Australian building codes and standards Excellent attention to detail and ability to produce accurate, precise drawings Strong communication skills and ability to work collaboratively with clients and builders Availability to start work immediately and complete projects on time If you are an experienced draftsman who meets these requirements, please submit your resume and portf...

I am building an addition/remodel and need help with the plans

My project is to create 3D kitchen interior renders and video. I have a modern design, and I have designs and floor plans ready. I am looking for renders in any format, including JPEG, PNG, and BMP. Create a 3D Kitchen model , then render (Photorealistic ) Based on : AutoCAD 2D Design, inspiration Kitchen images 3D models for the appliances .... Cerate the blow : Shoots for the kitchen (4 or 5 shoots in total), Walk-through Video (45 sec Full HD) ... The video will be the main page of my web site, shouldn't be long, but should look like real live professional grade video (with shallow depth of field - blurred back grounds)... List of Material : Black Matt - Main Material Fluted matt Black wood pattern (Round flutes drawn on the DWG file) Walnut Venee...

I need a digital catalogue of the product we produce. We are an aluminum fabrication company. Beneath is an outline of some of the products we build.  Gates o Laser Cut o Pool Code o Standard w kickplate o Standard  Fence o Standard  Addison Gateway   Cabanas o Standard o With sides  Architectural o Canopies  Standard o Shutters  Miscellaneous o Dog Doors o Laser Cut Divider Panels o Plant Holders  Designs for Laser Cut Panels o Organic o Geometric Our website is barfieldfence.com.

need a free lancer with good knowledge of interior designing and good skills for drawing in 2d and 3d

We are looking for a mechanical and/or structural engineer for a long-term collaboration and possibility for full time work, based in Indonesia. Our projects are on-going and exist mainly through skatesport facility construction. Profile; - Experience with light-weight steel construction projects. - Excellend English proficiency in both writing and speaking. - Relevant experience; at least 5 years. - Management skills; ability to lead a team. - Able to travel if needed, to quality control the project at the production facility. - Versatile work ethic; no 9-to-5 mentality. If you are interested in this offer, please respond with feedback on the points listed under "profile." Hourly or project-based prices are discussible.  We look forward to...

I'm looking for a specialist to design a bungalow which I wanted to construct in my farm! The materials to be used should be brick, and I also want to include a terrace and landscaping/gardens in the design. It is important to me that no detail is overlooked, so I'm hoping to find a qualified expert that can achieve my vision. The ideal candidate will have extensive knowledge and experience in this type of project, and be able to create something that is stylish, functional and timeless.

Hello there! I am looking for someone to produce 4 small drawing in CAD 2D in size A3 based on instructions I have provided. The whole project needs to be completed within 12 hours.