Arduino Measuring System & Software

Cerrado Publicado hace 7 años Pagado a la entrega
Cerrado Pagado a la entrega

I currently have a PLC that i would like to replace.

The current PLC and software solution is used in combination to control an electric motor in both the forwards and reverse operation.

The PLC has inputs from the incremental encoder and proximity sensor.

Basically a target length is entered into the system and the motor starts - Once the target length is achieved the motor stops.

I have an incremental encoder 1000 pulses per revolution. 200mm circumference wheel.

Currently the motor over runs the target once it is switched off. I would like to reduce this with some sort of offset on the target length.

I would like to replace the PLC and software with an arduino & relays to control the motor.

I imagine that the arduino will be more of a communication device between the PC or Tablet and the electric motor. The majority of this task will be programming.

I would like to control this via bluetooth if usb is easier then i will run with that for now. This is more of a prototype. just the basics at this stage.

Im guessing someone multi-skilled in both software and hardware will be needed.

Someone with experience please

I have a sketch appears to work well with the encoder.

Im really after someone who knows what they are doing!!

Please do not apply unless you are 100% sure you can complete the project.

I am wanting someone who can make an immediate start!

Is anyone able to help me out?

Android Arduino Programación en C Microcontrolador Robótica

Nº del proyecto: #10292042

Sobre el proyecto

28 propuestas Proyecto remoto Activo hace 7 años

28 freelancers están ofertando un promedio de $197 por este trabajo

ahmedmohamed85

Dear sir I have more than 9 years experience in electronic design please check my profile also please message me so that we can discuss Best regards

$333 AUD en 4 días
(208 comentarios)
7.4
mechatronicsengr

Hi, I hope you are doing well. I have read your project. I would like to discuss it in more details. Looking Forward, Khawaja

$147 AUD en 3 días
(96 comentarios)
7.0
Anthony989

Hello, I am Anthony. I am working FULL TIME as freelancer. I have double degrees in Mechatronics and Applied Science fields. I have very good feedbacks on freelancer.com . Please check the lin Más

$155 AUD en 3 días
(60 comentarios)
6.5
microembedded

hi i am an electrical engineer. i have vast experience regarding micro controllers and their programing. i have worked on many embedded systems. i have worked on many projects regarding motor control. i can do this pr Más

$500 AUD en 3 días
(20 comentarios)
6.2
oobretenov

What kind of PLC you have now. What kind of encoder you have . Now the motor has ON/OFF control only? You need just one offset - The PLC also could communicate with PC . I could help you with arduino , but you have to Más

$277 AUD en 3 días
(43 comentarios)
6.1
tuan10clc

Hello. I am expert in PLC/SCADA/Arduino. I have reviewed your project carefully. I think you should use PLC S7-1200 for your project because: - S7-1200 has 2 high speed counter able receive pulse encoder. - S7-1200 Más

$155 AUD en 6 días
(20 comentarios)
5.1
gauravsharma132

Dear Friend, We have good experience in embedded software and design, It is not only our job but passion. We have worked on from basic hardware to quad-copters. Also have lot of happy and overwhelmed clients, we tr Más

$144 AUD en 7 días
(24 comentarios)
5.0
andualemtad

I am a PhD student in Robotics area. I have a very good background in Motor control, instrumentation, writing firmware. I have also good experience in Bluetooth serial (SPP) and Bluetooth BLE protocols.

$222 AUD en 5 días
(4 comentarios)
5.4
neliosmix

Hi, I have experience with arduino and electronics. I'm sure I can do your project and even give you some suggestions or recommendations. I only have one question now, how do you plan to control it from pc or tablet Más

$300 AUD en 10 días
(3 comentarios)
3.7
ricardopaschoeto

Hi, If you want we have a conversation about your project and/or you if you want i will start with the project analyze and after send some first ideas to you. Best Regards,

$200 AUD en 10 días
(2 comentarios)
2.8
hazemhaiba

Hello there , i am a mechatronics engineer with great experience with arduino , i've built a segway and a 3d printer using arduino and plenty of other projects . i know that we can work with PID to reach a better per Más

$88 AUD en 3 días
(5 comentarios)
2.0
vijayraviramkuma

Hi I have very good experience in SCADA/PLC Programmer, Development, Testing in Industrial Automation Fields, and Implementation of Various PLC/SCADA/Embedded based Applications products, If my profil Más

$155 AUD en 3 días
(1 comentario)
0.0
Sunny1090

I had almost the same project last year

$55 AUD en 5 días
(0 comentarios)
0.0
kldsdv

I have great experience on arduino developing! I also have many protoypes working good at this time. We can replace that PLC easily !

$155 AUD en 6 días
(0 comentarios)
0.0
samith07

I'm new to freelancer. But not to the Software and Automation Industry specially Robotics. I'm confident that I'm capable of implementing any kind of C, C++, Java based software on time as you wish...

$30 AUD en 10 días
(0 comentarios)
0.0
enzosanmartin

CEO Eagle Aerospace Tecnologies LLC Jul 2007 - Presente Design and implementation of projects in infraestructure , energy, aerospace,astronomical, industrial The research and consulting in the field of engineering Más

$250 AUD en 10 días
(0 comentarios)
0.0
ivystephen001

I only a few questions 1) what of motor are you using * a small stepper motor should ideal,if your not using one already 2)can i use MOSFET instead of relays * it would make it much easier to control,wi Más

$55 AUD en 3 días
(0 comentarios)
0.0
ahsandilawarr11

i am Assistant Technical manager of Sublime Enterprise . i have 5 year experience to work on microcontroller, PLC ,arduino e.t.c , i also design lots of industrial product . Design Pakistan's 1st RFID debit card syst Más

$200 AUD en 3 días
(1 comentario)
2.1